Cheap Digi-Code 2 Button Visor Transmitter 300mhz - Multicode Compatible On Sale

The DC5060 is a two button Stanley compatible transmitter. It is able to operate your gate and garage door or two independent garage doors. It has 1024 possible codes for each button to insure your security.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Replacement Product works AAA!
Product works as it should and no problemas are presented when configuring to garage motor.

No dislikes and all likes.

Recommended this product to neighboors and familiy members.

Click here to read the full review for more information about this product.

Digi-Code 2 Button Visor transmitter
We needed a new garage door opener and this works very well. Two stall garage so can open either one from the car. Works great.


Product Features :

• Ideal for community gates with individual garages
• Compatible 2-channel remote control transmitter
• 2 Sets of 10 dip switches, 1,024 possible code combinations.
• Includes heavy duty Eveready 9 Volt battery and built-in LED light to indicate battery strength
• Battery, visor clip, and coding instructions included

Rating : 5.0
List Price : $14.20

Available at Amazon : Check Saved Price Now !

Read more...

Cheap Multicode 1099-50 - 310 MHz Receiver 12-24 Volt 300 On Sale

Multicode 12 to 24 Volt gate or garage door opener receiver Model 1099-50 with coax antenna (300/310 MHz) 12 or 24 Volt AC or 10.5 to 30 Volts DC 300 or 310 MHz Frequency, gate opener or garage door opener receiver. 10 Dip Switches, single channel, will operate one device. Works with Multicode 300 MHz remotes or Stanley 310 MHz remotes, but not both at the same time. 300 or 310 MHz jumper-selectable frequency adjustment. 4 36 22AWG wires on removable connectors for easy installation, easy to follow instructions included. Power: red and black wires. CH1 Relay: 2 gray wires. Coaxial antenna for longer range and perfect for use with gate openers with metal covers. Replaces the 1099-30 or 1090CX. Includes 9.5 local whip antenna, 3 ft. of 75 ohm coaxial cable, bulkhead connector, mounting hardware. One year Multicode manufacturer warranty.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Multicode Reciever
Product arrived in a timely fashion, was exactly as described and (coupled with a twin pack of basic transmitters) it performed flawlessly. Took minutes to install.

Click here to read the full review for more information about this product.

worked better than expected in our application
Had one of my technicians install it, and the installation went smoothly. The reciever has better range than similar reciever that we had installed by a vendor at another facility
Increased my range significatly over the 1090
Hi all,
I used a multicode 1090 for about 2 years and over time it seems like my range dropped to near point blank range. I bought a new transmitter and that helped a little but I was frustrated by the lack of range. I used to work at a gate store so I knew a little about these things. Some of the 1090's we installed had good performance so I don't want to talk bad about all of them so I guess I just had bad luck. I decided to try the 1099 out of frustration and curiosity and wow I can be down the street and my gate opens. If the remote is pointed the wrong way I have to be at the driveway entrance (long driveway) but that is still good enough for me. I am satisfied by my purchase and I just wanted to say thanks and encourage others and to say the extra money was worth it. My only complaint is the length of coaxial cable supplied with the kit. It is a little short at 3 feet in my opinion. I wish it was double but that may not help range much more.

Product Features :

• 10 Dip switches, single channel, will operate one device
• 300 or 310 MHz jumper-selectable frequency adjustment
• 4 36 22AWG wires on removable connectors for easy installation
• Easy to follow instructions included
• Includes 9.5 local whip antenna, 3 ft. of 75 ohm coaxial cable, bulkhead connector, mounting hardware

Rating : 4.5
List Price : $36.49

Available at Amazon : Check Saved Price Now !

Read more...

Cheap Multicode 3028-50 and 3022 Combo Kit For sale

Features & Specifications: Dual frequency - Multi-Code or Stanley compatible; jumper selectable. 12-24 Volts AC or DC, Auto voltage sensing - no jumpers to set. Two relays, their relay contact(s) are rated at 30 VAC/DC up to 5 Amps. Will hold 512 remotes using the dip switch settings. Supplied with whip antenna, three feet of coaxial cable and bulkhead connector. Power: 12 - 30 VAC or 10.5 - 30 VDC; 16 mA nominal, 50 mA maximum while relay is triggered. Frequency: 300 MHz and 310 MHz. Dimensions: 3.625 x 5.25 x 1.5 inches
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Click here to read the full review for more information about this product.

Product Features :

• Dual frequency - Multi-Code or Stanley compatible
• Auto voltage sensing and no jumpers to set
• Two relays, their relay contact(s) are rated at 30 Volts AC/DC up to 5 Amps
• Frequency: 300 MHz and 310 MHz
• Dimensions: 3.625 x 5.25 x 1.5 inches

Available at Amazon : Check Saved Price Now !

Read more...

Best Heddolf 300MHZ Garage Door Opener for Multicode Gate or Garage Door Systems For sale

Full sized remote.This transmitter is compatible with any Stanley. It has 10 dip switches. Comes with battery and visor clip.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Easy, fast and reliable
I have a 14 year old Overhead door garage door opener. We initially received 2 OHD remotes and added a third two years ago (cost = $49). I needed a fourth but was taken back by their price, now $59. Knowing the frequency (390Mhz), I shopped around on Amazon, and found the Heddolf. My order came in three days. It took me longer to open the box than it did to program the new remote. I now have a more powerful remote at half the price.

OBTW, there are many different operating frequencies for the remotes...look on the back of the case and the frequency will likely be a three digit number associated with the part number.

Click here to read the full review for more information about this product.

Rating : 5.0
List Price : $16.99

Available at Amazon : Check Saved Price Now !

Read more...

Best Multicode - Gate or Garage Door Opener Receiver On Sale

Multicode 1090 receiver for gate or garage door openers. 300 MHz Frequency. 10 Dip switches for coding. 24 Volts, 3 connecting prongs for easy installation. Upgrade or replace your old garage door opener receiver. Universal, installs on any automatic garage door opener. This receiver is perfect for use on access gates as well. Includes easy to follow schematics and installation instructions. Compatible remotes: Carper 300, Multicode 3060, Multicode 3070, Multicode 3083, Multicode 3089, Multicode 4120, Multicode 4140, Multicode 4200, and Skylink 100.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Additional equipment may be required
Rather than replace our perfectly good 30 year old garage door opener just because a couple of our transmitters quit working, it made more sense to replace just the receiver and transmitters at about 1/3 of the cost. In the description for the receiver, it says it works with any opener. This isn't exactly true. It will work, as is, with any opener that has a 3 wire connection. Since mine is 30 years old, it only uses 2 wires. Turns out that I also need to buy an adapter that converts the 3 wire to 2 wire and includes a power supply for the new receiver. Cost for the adapter is around $15; not a lot, but it would have earned 5 stars if it had mentioned this in the description.

Also... ironically, the company sells a bundled package with a receiver and transmitters at a higher cost than if you buy them separately so be sure to compare the cost options.

Click here to read the full review for more information about this product.

great replacement garage door receiver
After 30 years, my automatic garage door opener started to have problems. I replaced the battery in the transmitter but still continued to have problems and then it stopped working all together. I decided the receiver was dead and found this replacement which appeared to be compatible. Installed it in minutes and it works great with my existing transmitters.
Hard to find
These things are getting harder to find but had no problem here and at a resonable price. Took 5 minutes to install.

Product Features :

• Receiver for gate or garage door openers
• 300 MHz Frequency
• 10 Dip switches for coding
• 3 Connecting prongs for easy installation
• Universal, installs on ANY automatic garage door opener

Rating : 4.8
List Price : $17.05

Available at Amazon : Check Saved Price Now !

Read more...

Cheap Multicode 3028-50 - 2 Channel Gate or Garage Door Opener Receiver On Sale

The 3028-50 comes in a plastic housing that is easy to work with. It will operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. Features: Dual frequency - Multi-Code or Stanley compatible; jumper selectable 12-24 Volts AC or DC. Auto voltage sensing - no jumpers to set. Two relays, their relay contact(s) are rated at 30 VAC/DC up to 5 Amps. Will hold 512 remotes using the dip switch settings. Supplied with whip antenna, three feet of coaxial cable and bulkhead connector. Power: 12 - 30 VAC or 10.5 - 30 VDC; 16 mA nominal, 50 mA maximum while relay is triggered. Frequency: 300 MHz and 310 MHz. Dimensions: 3.625 x 5.25 x 1.5 inches
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Click here to read the full review for more information about this product.

Product Features :

• Comes in a plastic housing that is easy to work with
• Will operate two gates, one gate and an obstacle sensor
• Dual frequency - Multi-Code or Stanley compatible
• Power: 12 to 30 Volt AC or 10.5 to 30 Volt DC
• Frequency: 300 MHz and 310 MHz

List Price : $39.50

Available at Amazon : Check Saved Price Now !

Read more...

Cheap Dolphin Keypad 300/310 Universal for Multicode, Linear and Stanley Transmitters For sale

Keypad Compatible with Linear, Multi-code and Stanley dip switch receivers


Specifications
? 8/10 dip switch
? Dual-frequency - 300/310 MHz
? Compatible with Linear, Multi-code and Stanley dip switch receivers
Compatibility
REMOTES
? MULTICODE: 3089, 1089, 3083, 4120, 3070 and 3060 DIGI-CODE: DC5010, DC5012 and DC5040 HEDDOLF: P-219, APOLLO 300Mhz Carper CX-310 1-CH Keychain 310 MHz Gate Remote NuCode Mini 310mhz.8dip Skylink Multilink SD-310M Mini Keychain LINEAR: Delta series, Delta 3, Mini-T, Ladybug, DT, DT2A, Moore-O-Matic Delta 3 Remote (same as DTD or DT). STANLEY : 1050, 1094KEYPADS
? Linear DTKP Delta 3 310MHz Keypad Stanley 2986 Stakp 310 Mhz Wireless Keypad 298601 Digi Code 5202 Garage Door Opener Keypad 310 Mh DigiCode 5200 300 MHz Wireless Keystone M330-1KA Wireless 300Mhz Multicode 4200 300 MHz Linear MultiCode Wireless (310 Mhz) 298601RECEIVERS
? MultiCode 1090, 1099, 3021, and 3028, and the Tricode TCG1, TCG2, TCR1 and TCR2 gate or garage door opener receivers. LinearDelta DRG, GRD STanely - 1099-31, 1099-50, 2031-02 Linear 302101, 109020, 109950, 302850,
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Don't waste your time with this cheap piece of junk !!!
You definitely get what you pay for with wireless keypads. This is even less than you would expect for $17 (I paid $15 + shipping direct from Community Controls). Bought it to replace an exterior post mounted keypad to use in conjunction with a 310 mhz Digicode receiver controlling a gate opener. Flimsy plastic door barely stayed in position after the first 48 hours. Programming was relatively easy. You have both jumpers and dipswitches to match with your receiver. However this unit is not waterproof. It is not water resistant. It is not moisture resistant. It was mounted on a post with protection from 3 directions similar to what you would have on the outside doorframe of a garage door. First sideways rainstorm (10 days after installation) - it stopped working and is now in my yard art scrap pile. The instructions don't mention that the item is not water resistant/water proof. When I called customer service @ Community Controls they essentially told me I was out of luck. If you have...

Click here to read the full review for more information about this product.

grabage
garbage. This is not weatherproof. If you plan to have this outdoors, do not buy. A 9 volt battery lasted a week and a half. Waste of money.


Product Features :

• 8/10 Dip switch
• 300/310 Dual Frequency
• Compatible with Linear, Multicode, and Stanley
• Multicode 3089, 3060, 3070, Linear DT, Ladybug/Mini T
• Stanley 1080

Rating : 1.0

Available at Amazon : Check Saved Price Now !

Read more...

Cheap Multicode 1090 Receiver with 2-3089 Remote 300MHz On Sale

1090 reciever and 3089 garage door remote controls. comes with visor clips and batteries included
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Works great, easy to install
I had a garage door opener that didn't have a remote, I installed this in about 15 minutes and it works great. It also has great range, I can get my door opening from about 3 houses down.

Click here to read the full review for more information about this product.

Works great with older Sears Openers (With minor modifications)
My old Sears Craftsman Opener model 139.664053 is over 20 years old and the external mounted receiver was long gone. The Multicode 1090 receiver will work perfectly with this old unit provided you swap two wires inside the opener terminal strip. On my opener they were the black and grey wires. If you have one of these brutes with the 4 terminal strip, simply open it up and swap the wires going to terminal 2 and 3, which aligns the terminals to match the Multicode 1090 receiver terminals. Attach the receiver to terminals 2-3-4 and you are all set. My only complaint was the remote transmitter was very hard to open up for setting the dip switches. Otherwise, this is a very economical solution. I have to say, however, that they don't build openers like this anymore, since mine has worked great for years.
Just needed the remotes
My dad bought his house long ago with a Challenger CH-1000 garage door opener which had a Multi-Code receiver attached. One of the remotes quit working. The Multi-Code receiver was old enough that the model number couldn't be read from the label so I ordered this combo assuming I would have to replace both the receiver and the remotes to assure a match. After quickly installing the receiver I found it didn't work correctly with his opener. Instead of diagnosing the problem I just reinstalled the older receiver and found the new remotes would work. ASPDOORS allow me to return just the receiver so kudos to ASPDOORS. The new remotes have an LED that the old remotes didn't have. My dad will now know he needs to replace the battery in the remote if the LED doesn't light up when he pushes the button.

Product Features :

• commulti-code 1090 receiver kits with 2 3089 garage door remote controls
• can be used to convert any garage door opener to this
• every thing you need for conversion is included

Rating : 5.0
List Price : $42.95

Available at Amazon : Check Saved Price Now !

Read more...

Best Multicode 1090-3089 - 300MHz 1 Receiver with 1 Remote On Sale

The Model 1011 Multi Single is a Multi-Code transmitter and receiver set. The set contains one Model 308911 1-Channel Visor Transmitter and one Model 109020 1-Channel Receiver.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Replace your garage door opener's brain
If you have an old 8-position garage door opener, this is what you need. None of the manufacturers make remotes for the old boxes anymore, and odds are that the mechanics on your opener are fine. So why waste the time and money replacing the whole thing?

This 10 position changer works with its own and some of the other universal remotes. Just transfer the three lines from your old reciever unit to this one and you're done! I've set my car's "learning" remote to the same frequency with no problem at all. The remote that came with it also works fine after you set the dip switches to match.

NOTE that all of these receivers come with the same code preset so be SURE to change it before you put it up!

Click here to read the full review for more information about this product.

Replacement garage wireless receiver
Great product, It was an exact replacement for my failed receiver , was easy to install and performed as advertised
Wonderful
Arrived on time and it was exactly as described. This was as easy to install as it could get. Over all a very pleasant experience and I'm pleased every time we use it.

Product Features :

• Compatible with all 300 MHz Multi-Code radio controls
• Three terminal 24-volt receiver connects directly to operator
• Transmitter supplied with visor clip
• Transmitter powered by 9-volt battery
• RF frequency: 300 MHz

Rating : 5.0
List Price : $31.99

Available at Amazon : Check Saved Price Now !

Read more...

Best Multicode 3070 - Mini Garage Door Opener For sale

Multicode 3070 micro-mini key chain sized remote control. 300 MHz Frequency. Gate or garage door opener remote transmitter. Compatible with all Multicode 10 Dip Switch systems. Mini key chain size (2.5 by 1.25) convenient for purse or motorcycle. Velcro strip and 12V battery included with full manufacturer warranty. 300 MHz Frequency, 10 Dip Switches for coding. Compatible remotes: Carper 300, Multicode 1090, Multicode 3060, Multicode 3083, Multicode 3089, Multicode 4120, Multicode 4140, Multicode 4200, and Skylink 100.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Multicode 3070 Mini Opener: Opens things, is mini.
This does as good of a job as the full size opener. If you drive multiple cars and don't want to keep an opener in all of them then put this on your keychain.

Click here to read the full review for more information about this product.

A vast improvement over the larger unit, still kind of a POS
First thing is first: PAY ATTENTION TO THE "Open" ARROW DIRECTION, THE SWITCHES ARE UPSIDE DOWN FROM THE LARGER UNIT DESPITE NUMBERING. This has been said via many reviews, but I'd like to stress the point.

I wish they made a smaller unit and/or a better quality unit. Range is just as poor with this as the larger remote, so I'm thinking that the actual opener mechanism needs a stronger antenna. After cracking it open to set the switches, I feel like a few hours with a soldering iron and some basic re-engineering of the board could make this unit half the size.
Handy little product
While this might be 'just another remote' for your garage door, it's small size enables it to be dropped in a pocket OR carried in occasions where you have little spare room, such as on a motorcycle.
The keyring hole allows you to have it handy at all times, as close as your ignition key. It still has plenty of 'range' and gets the job done admirably.

Product Features :

• Micro-mini key chain sized remote control
• Gate or garage door opener remote transmitter
• 300 MHz Frequency
• Mini key chain size 2.5" x 1.25"
• 10 Dip Switches for coding

Rating : 4.5
List Price : $11.08

Available at Amazon : Check Saved Price Now !

Read more...

Cheap Linear Multicode 3089 Compatible Visor Remote Opener On Sale

The Linear Model 308911 1-Channel Visor Transmitter is a poratble transmitter designed for automatic door and gate operator applications manufactured by Linear only(Not for Sears, Liftmaster, Chamberlain,Genie). This transmitter is a single-channel device, pressing the pushbutton will send a signal to the receiver. The transmitter has a red test/operate indicator and is powered by a 9-volt battery. The transmitter is Multi-Code format with one 10-position coding switch providing 1,024 possible codes. The transmitter will only activate receivers set with the same code. The Model 308911 is compatible with 300 MHz Multi-Code receivers and Linear Model 109950 and 302850 receivers. A visor clip is included.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Simple to program. Easy to use.
As president of my Home Owners Association, the company that installed our gate handed me 130 of these to pass out among the residents. After half of them were out, the gate company told me that they'd not been programmed properly. Fortunately, they are a snap to program. Open it up. Flip the 10 toggle switches to the proper code. Close. Use. Runs on a 9V battery.

Click here to read the full review for more information about this product.

Works Perfect!
I've had some issues looking for a replacement Multicode opener at the local hardware stores in the area. I tried 2 different universal remote door openers with no luck. Came across this on Amazon and thought, what the heck. It's the same brand and model, and somewhat same shape/style. I set the dipswitches to match my garage door and the thing worked on the first try. Good deal!
Exactly what I expected
I bought this to give my girlfriend a remote control to my apartments, and it worked exactly as I'd expect. I simply looked up the model that I had, matched up the DIP switches, and it worked on the first try. It's nothing special, but I'm satisfied with the product, especially at the price point.

Product Features :

• Compatible with U.S. Multicode gate/garage door openers by Linear
• Replaces Multicode model 1089 300MHz 10 Dip Switch Remotes and Multi Elmac 3089
• 300 mhz frequency -10 (binary) dip switches
• Not Universal Remote-NOT COMPATIBLE WITH LIFTMATER, SEARS, GENIE, WAYNE DALTON, CHAMBERLAIN OPENERS
• 3089 Remote Includes: Remote, Visor Clip, Battery, Instructions

Rating : 4.5
List Price : $6.30

Available at Amazon : Check Saved Price Now !

Read more...